     |
     |
Click on the pictures see a Photo Gallery of the piece. Shipping on each item is $12.50
 |
Black Tie Flat and sleek. These were my objectives when designing this Board. The textured playing surface draws the eye and helps to optically stretch this board, making it appear longer than it is. Between the playing surfaces there are five raised flutes. Dimensions 12" long, 3 1/2" Wide 1/4" thick. Price $225.00 Call for Quantity Pricing |
 |
Flight 37 I love the simplicity in the design of this board. The material this piece is made from, 6061 Aluminum, is widely used in the aerospace industry, so it's only natural that I make a board that has wings. It is easy to see where this board, with it's wing like structures, got it's name. Dimensions 13" long, 3" Wide 3" thick. Price $295.00 Call for Quantity Pricing |
 |
Force 3 I created Force 3 at the request for a three player board. Inspired by Parallel Force, this board uses the same one inch solid aluminum rods for the playing surfaces. You'll notice the ends of these rods have been redesigned for Force 3, as well as the supports holding them up. Note the scalloped edges on both the rod ends and the supports. Dimensions 12" long, 4" Wide 1 1/2" thick. Made from 19 components. Price $395.00 Call for Quantity Pricing
|
 |
Seattle My first folding Cribbage Board came about at the request of a customer from Seattle. After a trip to my local hardware store it became apparent that stock hinges would never do. Check out the hinge on this piece. Designed and made specifically for this board the hinge is far stronger than it needs to be. The hinge has a 1/4 inch stainless steel pin and bronze bearings pressed into place. Why go this far? Simple, as with all of my work this board is designed to last a lifetime. When folded, magnets hold it in place. Dimensions 6" long, 2 1/2" Wide 1 1/4" thick, when folded. 12" long, 5/8" thick when open. Made from 42 components. Price $395.00 Call for Quantity Pricing |
 |
Force 3
Plus Inspired by a customer with a wish to keep score, This cribbage board is Force 3, Plus a score keeping pontoon added to the side. Dimensions 12" long, 5 1/2" Wide 1 1/2" thick. Made from 22 components. Price $450.00 Call for Quantity Pricing
|
 |
Vertigo Four structural beams made of high quality stainless steel make up the gaming surfaces of this piece. Between the beams are curved and fluted sections made from aircraft quality aluminum. Some have offered the opinion that this is one of my more masculine pieces, and I tend to agree. Like all of my work, Vertigo is built to last a lifetime. Dimensions 12" long, 3 1/2" Wide 3/4" thick. Made from 16 components. Price $395.00 Call for Quantity Pricing |
 |
Balance Heavy, crafted to last forever. Created by
using twin beam construction. Each beam fabricated from high quality
aircraft aluminum measuring 1 3/4" X 1" and a full 12" long. These beams
are substantial enough on their own, but when coupled together with 1
1/2 inch round columns, then bolted with four 1/2 inch Allen bolts you
get more than four pounds of substantial. Style is not lost in all this
mass. Check out the playing surface. Between each bank of holes is a
separate insert held in with 4 button head screws. These inserts can be
Brass or Aluminum. |
 |
Parallel Force Parallel Force is often chosen as a favorite when viewed with my other pieces. Strong angles and delicate curves blend nicely to create a sense of purpose beyond that of score keeping. Position this piece between you and a rival player and watch their expression. Two 1" Billet Aluminum rods over 15" long are precision machined then bolted with 1/4 inch stainless steel Allen bolts to four angled braces. Weight 2.33 lbs
Dimensions 15" long, 4" wide, 1 1/2" deep.
Made from 14 components. |
 |
Helix Made from thirty seven components,
this is not your typical Cribbage Board. Oval segments of aircraft
aluminum are bonded together with polished stainless steel pins. The
quality of components that make up Helix, along with all of my products,
are intended to provide a lifetime of enjoyment. Pegs can be ordered in
polished aluminum or brass. |
 |
UNO This Cribbage Board came at the request of a good friend of mine. He wanted a narrow Cribbage Board that would easily fit into a crowded kitchen drawer. I took the idea of storage one step further by incorporating a hole on the reverse side at one end of the piece. This hole allows the Board to be hung on the wall. Function becoming art, I like that. Dimensions, 11 1/4 inches long, 1 1/2 inches wide and 1/2 inch thick. Price $175.00 Call for Quantity Pricing
|
If you have an idea for a board or would like a custom board made just for you, let me know. This is how Seattle, the folding board came about.
A word about Pegs.
The standard pegs provided with my cribbage boards are Brass and aluminum, two of each. If you prefer all aluminum or brass, just let me know. The pegs are also sold separately for $25.00 per set. I have also made custom pegs in the past.
 |
Focus This Cribbage Board made from Aircraft quality aluminum and Acrylic Composite plastics. The piece can be used to display any type of artwork you choose, such as family photos, or your favorite team. For demonstration purposes it is shown here with a Mustang picture placed inside of it, but it will not be shipped that way. Dimensions 13 inches long. 5 inches wide and 1,1/8 inches Thick. Made from 8 components. Price $295.00 Call for Quantity Pricing
|
